The Reasons In Wall Fireplace Is More Tougher Than You Think

In Wall Fireplace – How to Choose the Right Height and Depth for Your Fireplace

An in wall fireplace provides a sleek and polished look without the expense of a mantle. It is one of easiest Electric firesuite fireplaces to install.

There are a few aspects to take into consideration prior to purchasing your in wall fireplace. To make the most of your investment, follow these helpful tips:.

Height

Although it might seem like an easy task but determining the height of your new fireplace is among the most important decisions to make. This is because the height of your fireplace can affect everything from how well it fits into a space to how visible it is. The fireplace may appear odd if it is raised too high. It will also detract from its beauty. A fireplace that is too low can be lost within the wall space.

Luckily, electric fireplaces are versatile enough to be placed at various heights. For instance, the majority of people prefer to place their fireplaces at eye level from a sitting position. This requires a height of 40 and 42 inches. Some people mount their fireplaces under their TVs. This is an attractive option.

The height of your fireplace depends on a number of factors such as the length and size of the wall you want to put it on. The bigger the room, the larger it can be. This could mean you are able to fit a larger fireplace in it. The same is true for the length of the wall as a wall with a greater length can accommodate a fireplace that is larger.

Another important factor to consider is how you intend to make use of your fireplace. If you intend to use it for decoration, then the lower height is ideal. If you intend to heat your home with it, you’ll need ensure that the fireplace is tall enough to meet local codes and safety standards.

It is important to choose the right size for your fireplace to ensure that it can fit into your decor and be easy to clean or fill. It is always a good idea to ask a professional fireplace installation expert to assist you if you are unsure of the best height to choose. They’ll be able recommend the perfect height for your fireplace based on their experience and your particular home.

Depth

A fireplace’s depth is important to consider if you intend to install it in a recessed place. If you are planning to cut into the wall, ensure that you have enough space to accommodate the fireplace’s internal design (the space for the smoke shelf above the firebox and the flue that is atop the roof). Also, think about the space you have available for the surround, and whether you’d like a fireplace mantle.

Many of the latest electric models of fireplaces have an interior depth that is almost concealed, giving them the appearance of a « built-in » look. This kind of wall fireplace that is electric is best exemplified by the Panorama BI Deep series. The model is 5.8-inch deep that allows viewers to view the flames and ember bed, and not the frame. The media package includes driftwood logs with natural colors, white pebbles or clear glass crystals that increase the embers’ glow and reflect the flames.

Gas wall-mounted fire places are also available in deep and shallow models. When deciding on the depth of your fireplace, it is important to keep in mind that these fireplaces are considered to be supplementary heat sources and should be vented properly by a skilled professional. When determining the depth for a gas fireplace, you need to think about the length of the vent pipe as well as the size of the chimney.

Whether you choose a surface mount or one-piece installation, it’s crucial to read and follow the manufacturer’s instructions carefully when installing your fireplace. A professional installer is recommended in most instances. It is also a good idea to have a second person on hand to install an fireplace.

Adding an in-wall fireplace to your home can be an great way to boost its value and add ambiance to your living spaces. It also can reduce your heating expenses. Furthermore, it’s a great option if you aren’t able to install traditional fireplaces in your home because of space constraints or due to the location of your existing chimney.

Surface Mount

If you’re not able or prefer not to cut into your wall or construct a space to accommodate an electric fireplace, a surface mount gives a sleek and built-in look. Some models, such as the Allusion line of electric fireplaces, can be mounted partially recessed into a wall without compromising the output of heat.

To begin the installation start by marking the wall using pencil where the bracket will be mounted. Use a stud finder to locate the studs within that area and make sure the mounting bracket is placed in the vicinity of one or more studs to ensure stability. If a stud isn’t accessible or isn’t suitable for your fireplace, make use of anchors for the drywall to support the mounting bracket.

After you have determined the position of the mounting brackets on the wall using a power drill, you can use it to screw them in and make sure they are aligned correctly with the studs. If possible, attach each bracket to a stud for strength and stability, however you can also use plastic anchors in the event of need. Once the mounting brackets have been installed then lift the fireplace up and hang it from the bracket. Once it’s secure, verify the position of your fireplace to ensure that it’s straight and not crooked within the opening.

Before you begin the installation, plug your fireplace in and ensure that all features work correctly. Start the fire, experiment with the flames, the heat, lighting of the ember bed, and the list goes on. When you’re satisfied with the results you can now install your floating mantel.

Depending on the type of your fireplace, you’ll have to connect the wire connection to the appliance wire connector at the bottom of the mantel or, if your fireplace has slots or hooks on the back connecting them to slots on the wall mounting brackets. Once you’ve done this you must follow the owner’s manual to find specific instructions on removing the front glass panel and inserting it into the opening.

Once you’ve removed the front panel of your fireplace and inserted it in its opening, follow your manual’s specifications to finish the installation by replacing the glass front and adjusting the height as required. If your fireplace has ember bed media, spread it across the top grate for a more natural look. Secure it using the screws that come with it.

Plug-In

These fireplaces with electric technology do not require chimneys or vents like traditional wood-burning fireplaces. Connected to a standard outlet, they provide additional heat to rooms up 400 square feet. They also offer multiple temperature and flame settings so you can customize the ambience. Certain models have LED lighting effects that enhance the ember bed and the fire. Some models feature a grille on top that hides the manual controls, but it can be opened easily to reveal buttons.

Electric fire places that plug in can be mounted directly on the wall or recessed for a built-in appearance. These units are typically easier to set up than mantel fireplaces. Some units include a pedestal to allow you place the fireplace on flat surfaces such as a dresser or buffet. Included is a remote control, mounting hardware and log set. Depending on the model, electric fireplaces could include heat and flame options that can be turned off to provide ambiance throughout the year.

Some models have adjustable privacy glass that you can change instantly from fully transparent to partially. This makes these models popular for walls that separate common entertainment spaces like living and dining areas. They can be even used in bedrooms where adding the fireplace is a cost-effective way to reduce the chill in an area without compromising privacy.

While plug-in electric fireplaces don’t require hardwiring as built-in models, they must be mounted within a wall that is at least free of studs and able to support the weight of the fireplace. Some models come with a kit which includes a pre-wired cord as well as a specially designed bracket to make the installation process less difficult. This kit can be used for construction of drywall or concrete.

When choosing a location for your wall mount electric fireplace, make sure it’s close to an electrical outlet. Electric fire places with plug-ins can be plugged in to outlets on the same circuit as the electric fireplace or into a dedicated outlet. It is suggested to have a separate circuit so that all other appliances in your home be powered by the same voltage. This could trigger your breaker.